6. Februar 2023

Swiss Steel Group is producing the steel of the future at the Steeltec AG mill in Düsseldorf

Ultra-fine-grained, high strength and tough steel thanks to XTP®

Lucerne. When standard steels need to have specific characteristics, expensive alloying additions and supplementary heat treatment are generally used. Steeltec AG, a company of the Swiss Steel Group, has developed an innovative, alternative technology for this very reason.

The company is progressive and trendsetting with its development of “Extreme Performance Technology (XTP®)” and with high-quality technology has found a way to produce an ultra-fine-grained and tough high-grade steel which makes the need for additional alloys and special treatment obsolete thanks to a controlled thermomechanical processing phase.

Systematic temperature control and alternative forming processes produce an extremely ultra-fine-grain microstructure with grain sizes of less than 5 µm. Steel produced in this way is noted for improved properties with better dynamic and mechanical characteristics, including:

  • Improved tensile strength of up to 2,050 MPa
  • Improved dynamic load capacity by at least 10 percent, leading to longer service life and higher operational safety
  • Significantly improved properties despite higher tensile strength
  • Formability and machinability
  • Components can be redimensioned without losing mechanical-technical properties making component design more flexible
  • Given the straightness of the bars, lengths of up to 8,000 (-0/+200) mm available with tolerances compliant to DIN EN ISO 286-2 *h11
  • No thermal distortion and no need for additional heat treatment

While XTP®-treated steel looks like conventional steel on the outside, its true excellence is hidden beneath the surface: the ultra-fine-grained steel microstructure provides an unprecedented level of material resistance and strength. This creates possibilities and paves the day to versatile designs and unconventional component engineering.

XTP steel withstands even difficult challenges, such as intense vibration, high internal pressure or extreme cold. Even at ultra-low temperatures of -101°C at which conventionally produced steel can become brittle and crack or break, the technically optimized steel grades have a high toughness (notched bar impact work of well over 27 joule in notched bar impact testing). Treatment with XTP technology guarantees the highest resistance to crack propagation.

Xtreme Performance Technology is the future

Thanks to consistent ongoing development of thermomechanical process phases virtually any conventionally produced steel can undergo treatment and be considerably improved. In short, the formula is: heat+ force = ultrafine-grained steel

When subjecting steel to induction heating, the experts of the Swiss Steel Group use austenitization to determine material properties and grain size of the steel microstructure. The steel bar is then immediately cooled to the desired forming temperature and fed into the high-reduction roller unit.

The steel of the future ex works

Steels suitable for XTP® treatment are unalloyed steels, precipitation-hardened ferrite-pearlite steels, Bainitic steels, quenched and tempered steels, tool steels, Austenitic stainless steels, Ferritic stainless steels, and high-speed steels. Steel processing companies stick with the steel grades they are familiar with. Using the same chemical analysis, the properties of Swiss Steel Group steels are significantly optimized from the start thanks to XTP®. The processor saves on elaborate, cost-intensive heat treatment. We solve quality problems with XTP® technology.

XTP-treated steel opens up entirely new possibilities for the following industries and applications: spring manufacturing, hydraulics, connectors and fasteners, refrigeration systems, lifting equipment and lifting gear, cable car and aerial lift systems, wind power, the railway industry, agriculture and forestry, as well as for oil and gas extraction and recovery.

– END –

For more information:
Helmut Freiherr von Fircks, h.freiherrvonfircks@ext.swisssteelgroup.com, +41 (0)41 581 4161

Anina Berger
Vice President Corporate Marketing and Communications
Swiss Steel Group

Steeltec AG
c/o Swiss Steel Holding AG
Landenbergstrasse 11
CH-6005 Lucerne
P: +41 41 581 4121
communications(at)swisssteelgroup.com

 

About Swiss Steel Group

The Swiss Steel Group is today one of the world's leading suppliers of individual solutions in the area of special steel long products. In both tool steel and stainless long steel, the Group is one of the leading manufacturers in the global market and one of the biggest companies in Europe for alloyed and high-alloyed engineering steel. With almost 10,000 employees and its own production and distribution companies in over 30 countries on five continents, the company ensures global support and supply for its customers and offers them a complete portfolio of production and sales & services worldwide. They benefit from the company's technological expertise, consistently high product quality worldwide, and detailed knowledge of local markets.

 

Photo credit: Swiss Steel Group